ASME/ANSI Transmission Series Double Pitch Roller Chain

Double Pitch roller chains are created in accordance with all the ASME/ANSI B29.three (Transmission Series) and B29.four (Conveyor Series) American roller chain requirements. In general these chains are related to ASME/ANSI regular solutions except the pitch is double. These are available in Transmission Series, Conveyor Series with Conventional (smaller) Rollers and Conveyor Series with Significant (oversized) Rollers.
Transmission Series
This series is often made use of on drives with slow to reasonable speeds, minimal chain loads and lengthy center distances. Side plates possess a fi gure ?¡ã8?¡À contour. The chain quantity is obtained by including 2000 on the ASME/ANSI chain quantity plus the prefi x letter ?¡ãA?¡À. Note that some organizations tend not to use a prefi x letter for this series so the chains may be represented as A2040, A2050 and so forth. or 2040, 2050 and so forth.
Conveyor Series with Typical (small) Rollers
This series is usually employed on light to reasonable load material dealing with conveyors with or without having attachment backlinks. The side plate contour is straight for enhanced sliding properties. Pitch sizes of 1-1/2?¡À and more substantial have ?¡ãHeavy?¡À series link plates (i.e. hyperlink plates on the following greater chain size. The chain quantity is uncovered by adding 2000 on the ASME/ANSI chain quantity and also the prefi x letter ?¡ãC?¡À. Chains together with the ?¡ãheavy?¡À type side plates use a suffi x letter ?¡ãH?¡À.
Conveyor Series with Large (oversized) Rollers
These chains possess large rollers so that the chain rolls on the conveyor track minimizing friction. Chain numbers are uncovered inside the very same way as mentioned over except that the last digit over the chain quantity is modified from ?¡ã0?¡À to ?¡ã2?¡À which denotes the massive roller.
Sprockets
Generally sprockets need to be generated specially for these chains according to your ASME/ANSI B29.3 and B29.4 requirements having said that, for Transmission Series and Conveyor Series with Standard (compact) Rollers, ASME/ANSI B29.one Standard roller chain sprockets may possibly be utilised provided the quantity of teeth is 30 or additional.

Tages