Product Description
JMIJ Type With Intermediate Diaphragm Shaft Coupling (JMIJ)
JM series diaphragm flexible coupling is widely used in the machinery and equipment industry, metallurgy, mines, petroleum, chemical, electric power, shipbuilding, lifting transport, textile, light industry, agricultural machinery, printing machinery, and water pump, fan, etc. in the transmission of power machine.
The main characteristics of JM Series Diaphragm Coupling:
1. Compensation two-axis misalignment of the ability, and tooth type coupling can be much more than a double angle displacement, radial displacement of the small, flexible, allowing a certain axial, radial, and angular displacement.
2. Obvious damping effect, no noise, no wear, and tear.
3. High transmission efficiency, up to 99.86%. Especially suitable for medium and high-speed high-power transmission.
4. Adapt to high temperature (-80+300) and harsh environments, and can be in shock, vibration, safety, and dynamic conditions.
5. Simple structure, lightweight, small size, convenient assembly, and disassembly. Without moving the machine can be disassembled (with intermediate type), with no need for lubrication.
6. Accurately convey the rotational speed, the operation has not turned bad, can be used for the transmission of precision machinery.
JM series diaphragm flexible coupling is widely used in the machinery and equipment industry, metallurgy, mines, petroleum, chemical, electric power, shipbuilding, lifting transport, textile, light industry, agricultural machinery, printing machinery, and water pump, fan, etc. in the transmission of power machine.
JMIJ Type Diaphragm Coupling Main Dimension(JB/T9147-1999)
| Type | Nominal torque Tn |
Peak torque Tmax |
Max Speed np |
Bore diameter d |
Bore Length | D | t | L2 min |
Mass | Rotary inertia | |||
| Y type | J,J1,Z,Z1 type | L(recommend) | |||||||||||
| L | L | L1 | |||||||||||
| N·m | N·m | r·min-1 | mm | kg | kg·m2 | ||||||||
| JMIJ1 | 25 | 80 | 6000 | 14 | 32 | – | J127 Z120 |
35 | 90 | 8.8 | 100 | 1.8 | 0.0013 |
| 16,18,19 | 42 | 30 | |||||||||||
| 20,22 | 52 | 38 | |||||||||||
| JMIJ2 | 63 | 180 | 5000 | 18,19 | 42 | 30 | 45 | 100 | 9.5 | 2.4 | 0.002 | ||
| 20,22,24 | 52 | 38 | |||||||||||
| 25 | 62 | 44 | |||||||||||
| JMIJ3 | 100 | 315 | 5000 | 20,22,24 | 52 | – | 38 | 50 | 120 | 11 | 120 | 4.1 | 0.0047 |
| 25,28 | 62 | 44 | |||||||||||
| 30 | 82 | 60 | |||||||||||
| JMIJ4 | 160 | 500 | 4500 | 24 | 52 | 38 | 55 | 130 | 12.5 | 5.4 | 0.0069 | ||
| 25,28 | 62 | 44 | |||||||||||
| 30,32,35 | 82 | 60 | |||||||||||
| JMIJ5 | 250 | 710 | 4000 | 28 | 62 | 44 | 60 | 150 | 14 | 140 | 8.8 | 0.5711 | |
| 30,32,35,38 | 82 | 60 | |||||||||||
| 40 | 112 | 84 | |||||||||||
| JMIJ6 | 400 | 1120 | 3600 | 32,35,38 | 82 | 82 | 60 | 65 | 170 | 15.5 | 13.4 | 0.5711 | |
| 40,42,45,48, 50 |
112 | 112 | 84 | ||||||||||
| JMIJ7 | 630 | 1800 | 3000 | 40,42,45,48, 50,55,56 |
112 | 112 | 84 | 70 | 210 | 19 | 150 | 22.3 | 0..76 |
| 60 | 142 | – | 107 | ||||||||||
| JMIJ8 | 1000 | 2500 | 2800 | 45,48,50,55, 56 |
112 | 112 | 84 | 80 | 240 | 22.5 | 180 | 36 | 0.1602 |
| 60,63,65,70 | 142 | 107 | |||||||||||
| JMIJ9 | 1600 | 4000 | 2500 | 55,56 | 112 | 84 | 85 | 260 | 24 | 220 | 48 | 0.2509 | |
| 60,63,70,71, 75 |
142 | 107 | |||||||||||
| 80 | 172 | 132 | |||||||||||
| JMIJ10 | 2500 | 6300 | 2000 | 63,65,70,71,75 | 142 | 142 | 107 | 90 | 280 | 17 | 250 | 85 | 0.5159 |
| 80,85,90,95 | 172 | – | 132 | ||||||||||
| JMIJ11 | 4000 | 9000 | 1800 | 75 | 142 | 142 | 107 | 95 | 300 | 19.5 | 290 | 112 | 0.8223 |
| 80,85,90,95 | 172 | 172 | 132 | ||||||||||
| 100,110 | 212 | – | 167 | ||||||||||
| JMIJ12 | 6300 | 12500 | 1600 | 90,95 | 172 | 132 | 120 | 340 | 23 | 300 | 152 | 1.4109 | |
| 100,110,120,125 | 212 | 167 | |||||||||||
Production Pictures
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.
5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artworks.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Proper Installation of a Diaphragm Coupling for Optimal Performance and Reliability
Proper installation of a diaphragm coupling is essential to ensure its optimal performance and reliability. Here are the steps to follow for a successful installation:
- Inspect the Coupling:
- Shaft Preparation:
- Hub Alignment:
- Tighten Fasteners Correctly:
- Check Runout and Balance:
- Lubrication (if applicable):
- Regular Maintenance:
Before installation, thoroughly inspect the diaphragm coupling for any damage, wear, or deformation. Check for proper alignment of the hubs and make sure they are clean and free from any debris or contaminants.
Ensure that the shafts to be connected are clean, smooth, and free of any burrs or rough edges that could damage the coupling or affect its performance. If necessary, use appropriate tools to deburr and polish the shaft ends.
Align the two hubs of the diaphragm coupling carefully with the shafts. Misalignment during installation can cause premature wear and failure of the coupling. Use alignment tools like dial indicators or laser alignment systems to achieve accurate shaft alignment.
Use the specified torque values and tightening sequence provided by the coupling manufacturer to tighten the fasteners securely. Over-tightening can lead to stress concentrations, while under-tightening can result in loose connections and coupling slippage.
After installation, check the runout of the coupling assembly to ensure that it rotates without wobbling or eccentricity. Also, verify that the coupling is properly balanced to prevent excessive vibrations during operation.
Some diaphragm couplings require lubrication for smooth operation. If lubrication is necessary, follow the manufacturer’s guidelines and use the recommended lubricant to prevent premature wear and reduce friction.
To ensure continued optimal performance, schedule regular inspections and maintenance for the diaphragm coupling. Check for signs of wear, misalignment, or damage, and replace the coupling if necessary. Regular maintenance can help identify potential issues early and prevent unexpected failures.
Following these installation and maintenance guidelines will help maximize the life and performance of the diaphragm coupling, ensuring reliable and efficient operation in various mechanical systems and applications.
Design Considerations for Selecting a Diaphragm Coupling for a Specific Application
When choosing a diaphragm coupling for a particular application, several crucial design considerations should be taken into account. Each application has unique requirements, and selecting the right diaphragm coupling can significantly impact the overall performance and reliability of the system. Here are the key design considerations:
- 1. Torque Capacity:
- 2. Misalignment Tolerance:
- 3. Speed and RPM:
- 4. Operating Environment:
- 5. Space Constraints:
- 6. Maintenance Requirements:
- 7. Application-specific Factors:
Determine the maximum torque that the diaphragm coupling will need to transmit in the application. Select a diaphragm coupling with a torque capacity that comfortably exceeds the application’s peak torque requirements. Consider potential torque variations during operation and choose a coupling that can handle the dynamic torque conditions, especially in machines with frequent start-stop cycles or load fluctuations.
Assess the potential misalignment between the connected shafts in the application. Diaphragm couplings are known for their ability to compensate for various types of misalignment, such as axial, angular, and parallel misalignment. Determine the expected misalignment angles and choose a diaphragm coupling with the appropriate misalignment capabilities to ensure smooth operation and minimize stress on the coupling and connected machinery.
Consider the rotational speed and RPM (revolutions per minute) requirements of the application. Diaphragm couplings are suitable for high-speed applications due to their balanced design and ability to dampen vibrations. Ensure that the selected coupling can handle the required RPM without encountering critical speed issues or exceeding its rated limitations.
Evaluate the environmental conditions in which the diaphragm coupling will operate. Consider factors such as temperature, humidity, presence of corrosive substances, and exposure to contaminants. Choose a diaphragm coupling made from materials suitable for the specific operating environment to prevent corrosion and premature wear.
Diaphragm couplings have a compact design, making them suitable for applications with limited space. Consider the available installation space and choose a coupling that fits within the available dimensions while providing the required torque capacity and misalignment compensation.
Assess the maintenance requirements of the diaphragm coupling. Some couplings may require periodic lubrication, while others are maintenance-free. Choose a coupling with maintenance requirements that align with the resources and capabilities of the maintenance team.
Consider any unique factors relevant to the application, such as the presence of shock loads, dynamic balancing requirements, or the need for precision in high-accuracy systems. These specific factors can influence the selection of the most suitable diaphragm coupling for the application.
By carefully considering these design factors, engineers and designers can select the most appropriate diaphragm coupling for a specific application. The right coupling choice will enhance the overall performance, reliability, and service life of the machinery or equipment in which it is employed.
Are There Any Industry Standards or Certifications for Diaphragm Couplings?
Yes, there are industry standards and certifications that apply to diaphragm couplings, ensuring their quality, performance, and safety. Some of the notable standards and certifications include:
- American Petroleum Institute (API) Standards: API provides standards for various equipment and components used in the oil and gas industry. For diaphragm couplings used in oil and gas applications, compliance with API standards ensures that the couplings meet specific requirements and are suitable for use in demanding environments.
- American Gear Manufacturers Association (AGMA) Standards: AGMA sets standards for various types of couplings, including diaphragm couplings. These standards cover design considerations, materials, performance, and safety factors, ensuring that couplings adhere to industry best practices.
- International Organization for Standardization (ISO) Standards: ISO has several standards relevant to couplings in general, which can also apply to diaphragm couplings. ISO standards ensure global consistency in terms of design, manufacturing, and performance criteria.
- European Conformity (CE) Marking: Diaphragm couplings intended for sale within the European Economic Area (EEA) must bear the CE marking, indicating that they comply with relevant European Union (EU) directives, including safety and environmental requirements.
- American National Standards Institute (ANSI) Standards: ANSI sets standards for various industrial equipment, including couplings. ANSI standards provide guidelines for design, materials, and performance, ensuring safe and reliable operation.
- Occupational Safety and Health Administration (OSHA) Compliance: Although not a specific certification for diaphragm couplings, compliance with OSHA regulations is essential to ensure the safety of workers who operate and maintain equipment with diaphragm couplings.
Manufacturers of diaphragm couplings often seek these certifications and comply with relevant industry standards to demonstrate the quality and reliability of their products. Customers and end-users can look for these certifications and standards compliance when selecting diaphragm couplings for their applications, as it provides assurance of the coupling’s performance and adherence to safety requirements.
editor by CX 2024-03-12