Product Description
Product Description
Diaphragm couplings provide an economical transmission solution for general equipment, with waisted diaphragms, greater operating torque and less diaphragm stress.
The maximum opening value is a round hole or a tapered hole with a keyway. If you need to open other types of holes, please consult CHINAMFG Technology.
Related Products
Main application:
DWZ disc eddy current brake is mainly used as load in loading dynamometer equipment. it is experimental apparatus which can measure the dynamic mechanical properties, especially in dynamic loading test whose power value is small or tiny, also can be treated as suction power devices of other dynamic devices.
DW series disc eddy current dynamometer is, is that add device for measuring torque and rotational speed on DWZ series disc eddy current brake, it is experimental apparatus which can measure the dynamic mechnical properties, especial in dynamic loading test whose power value is small or tiny.
CW eddy current brake as a load is mainly used to measure the mechanical characteristics of inspection equipment, it and other control instrument (including loading apparatus, torque speed sensor and torque power acquisition instrument etc.) can be composed of eddy current dynamometer can be used for performance testing of the internal combustion engine, motor, gas turbine, automobile and its dynamic mechanical components, compared with other power measuring device, the CW series power measuring device has the advantages of reliability, high stability and practicability.
| Eddy current brake/dynamometer | Rated Power | Rated torque | Rated speed | Maximum rotational speed | Turning inertia | Maximum excitation voltage | Maximum excitation Current | Cooling water pressure | Flow of the cooling water |
| DWZ/DW-0.75 | 0.75 | 5 | 2000-2600 | 16000 | 0.002 | 80 | 3 | 0.1~0.3 | 1 |
| DWZ/DW-3 | 3 | 10 | 2000-2600 | 14000 | 0.003 | 80 | 3 | 0.1~0.3 | 2 |
| DWZ/DW-6 | 6 | 25 | 2000-2600 | 14000 | 0.003 | 80 | 3 | 0.1~0.3 | 3 |
| DWZ/DW-10 | 10 | 50 | 2000-2600 | 13000 | 0.01 | 80 | 3 | 0.1~0.3 | 4.5 |
| DWZ/DW-16 | 16 | 70 | 2000-2600 | 13000 | 0.02 | 80 | 3.5 | 0.1~0.3 | 6.5 |
| DWZ/DW-25 | 25 | 120 | 2000-2600 | 11000 | 0.05 | 80 | 3.5 | 0.1~0.3 | 15 |
| DWZ/DW-40 | 40 | 160 | 2000-2600 | 10000 | 0.1 | 90 | 4 | 0.1~0.3 | 25 |
| DWZ/DW-63 | 63 | 250 | 2000-2600 | 9000 | 0.18 | 90 | 4 | 0.1~0.3 | 45 |
| DWZ/DW-100 | 100 | 400 | 2000-2600 | 8500 | 0.32 | 120 | 4 | 0.1~0.3 | 60 |
| DWZ/DW-160 | 160 | 600 | 2000-2600 | 8000 | 0.52 | 120 | 5 | 0.1~0.3 | 100 |
| DWZ/DW-250 | 250 | 1100 | 2000-2600 | 7000 | 1.8 | 150 | 5 | 0.2~0.4 | 180 |
| DWZ/DW-300 | 300 | 1600 | 2000-2600 | 6000 | 2.7 | 150 | 5 | 0.2~0.4 | 210 |
| DWZ/DW-400 | 400 | 2200 | 2000-2600 | 5000 | 3.6 | 180 | 10 | 0.2~0.4 | 300 |
| DWZ/DW-630 | 630 | 3600 | 2000-2600 | 5000 | 5.3 | 180 | 10 | 0.2~0.4 | 450 |
Company Information:
Product Line:
Advantages:
FAQ:
CONTACT US:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Safety Considerations When Using Diaphragm Couplings in Critical Applications
When using diaphragm couplings in critical applications, certain safety considerations are essential to ensure reliable and safe operation. Here are some important safety considerations:
- Proper Installation:
- Regular Inspections:
- Monitoring Temperature and Torque:
- Environment Compatibility:
- Redundancy and Backup Systems:
- Compliance with Industry Standards:
- Operator Training:
- Emergency Shutdown Procedures:
Ensure that the diaphragm coupling is installed correctly, following the manufacturer’s guidelines and recommended torque values for fasteners. Improper installation can lead to misalignment, excessive vibrations, and premature wear of the coupling components.
Perform regular inspections of the diaphragm coupling to check for signs of wear, fatigue, or damage. Regular maintenance helps identify potential issues early, allowing for timely replacement and preventing unexpected failures.
In critical applications, it’s crucial to monitor the temperature and torque levels of the diaphragm coupling during operation. Excessive heat or torque can lead to coupling failure, so having monitoring systems in place helps detect abnormal conditions and take necessary actions promptly.
Consider the operating environment of the diaphragm coupling. In corrosive environments, use materials that are resistant to chemical attacks, and in high-temperature settings, choose materials that can withstand elevated temperatures without compromising performance.
In critical applications, consider implementing redundancy or backup systems to ensure continued operation in the event of a failure. Having redundant couplings or alternative power transmission methods can enhance the overall reliability of the system.
Adhere to relevant industry standards and guidelines when selecting and using diaphragm couplings in critical applications. These standards ensure that the coupling meets specific safety and performance requirements.
Ensure that operators and maintenance personnel receive proper training on the installation, operation, and maintenance of the diaphragm coupling. Well-trained personnel can identify potential issues and take appropriate actions to maintain safe operation.
Establish clear emergency shutdown procedures to stop the machinery quickly in case of any abnormality or unsafe condition related to the diaphragm coupling. Emergency shutdown procedures are crucial for protecting personnel and equipment from harm.
By considering these safety considerations and implementing appropriate measures, diaphragm couplings can be used with confidence in critical applications, ensuring safe and reliable operation in various industries and systems.
Real-World Case Studies of Diaphragm Couplings in Engineering Projects
Diaphragm couplings have been successfully utilized in various engineering projects, providing reliable power transmission and addressing specific challenges faced by different industries. Here are some real-world case studies and success stories showcasing the effectiveness of diaphragm couplings:
- Case Study 1: Pumping System in Wastewater Treatment Plant
- Case Study 2: Turbine-Generator Coupling in Power Plant
- Case Study 3: Industrial Compressor System
In a wastewater treatment plant, a critical pumping system was experiencing frequent breakdowns due to misalignment issues and vibration-related failures. The plant engineers decided to replace the existing gear couplings with diaphragm couplings to address these problems. The diaphragm couplings’ flexibility allowed them to compensate for the misalignment caused by thermal expansion and pump impeller wear. Additionally, the couplings’ ability to dampen vibrations reduced stress on the pump bearings, resulting in extended maintenance intervals and increased overall system reliability. The successful implementation of diaphragm couplings in this project led to significant cost savings by minimizing downtime and reducing the need for frequent maintenance.
In a power generation plant, a large gas turbine-generator coupling required replacement due to excessive wear and fatigue-related failures in the previous coupling. The plant engineers opted for a high-performance diaphragm coupling with improved fatigue resistance and higher torque capacity. The flexibility of the diaphragm coupling allowed it to accommodate slight misalignments between the turbine and the generator during operation. This capability reduced the stress on the coupling and mitigated the risk of premature failure. The diaphragm coupling’s ability to handle torsional vibrations and dampen mechanical resonance further improved the overall reliability and performance of the turbine-generator system, resulting in increased power generation efficiency and reduced maintenance costs.
In an industrial compressor application, the existing coupling experienced frequent failures due to misalignment and shock loads from varying compression demands. The plant engineers replaced the old coupling with a diaphragm coupling featuring high misalignment tolerance and excellent shock absorption properties. The diaphragm coupling’s flexibility effectively compensated for the misalignment between the compressor and the motor, resulting in smoother operation and reduced stress on the drive components. Additionally, the coupling’s ability to absorb sudden shock loads reduced the risk of equipment damage and minimized unplanned downtime. The successful implementation of the diaphragm coupling significantly improved the compressor system’s reliability and contributed to increased productivity in the industrial facility.
These case studies demonstrate the successful application of diaphragm couplings in diverse engineering projects, including wastewater treatment plants, power generation facilities, and industrial compressors. The flexibility, misalignment compensation, and vibration dampening properties of diaphragm couplings have proven to be valuable in addressing specific challenges and enhancing the performance and reliability of critical machinery in various industries.
What is a Diaphragm Coupling and How Does it Function in Mechanical Systems?
A diaphragm coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are slightly misaligned. It consists of two hubs, each attached to a shaft, and a flexible diaphragm in between.
The function of a diaphragm coupling is to accommodate misalignment while transmitting torque smoothly and efficiently. Here’s how it works:
- Torsional Flexibility: The diaphragm, typically made of metal, is designed with a series of corrugations or convolutions. These corrugations allow the diaphragm to flex and bend in response to shaft misalignment.
- Transmitting Torque: When torque is applied to one shaft, it gets transferred to the diaphragm, which then flexes to accommodate any angular, parallel, or axial misalignment between the shafts.
- Maintaining Alignment: As the diaphragm flexes, it maintains a constant connection between the two hubs and ensures that the rotational motion is smoothly transferred from one shaft to the other.
- No Lubrication: Diaphragm couplings do not require any lubrication, making them low-maintenance and suitable for various applications.
- High Torque Capacity: Despite their flexibility, diaphragm couplings can handle high torque loads, making them ideal for demanding mechanical systems.
- Vibration Damping: The flexibility of the diaphragm also helps in dampening vibrations, reducing the risk of damage to connected machinery.
- Compensation for Misalignment: Diaphragm couplings can compensate for angular, parallel, and axial misalignment, although their angular misalignment capacity is typically higher than the other types.
In summary, a diaphragm coupling provides a reliable and efficient way to transmit torque while accommodating misalignment, reducing wear and tear on equipment, and ensuring smooth operation in various mechanical systems.
editor by CX 2024-04-25