Materials Handling Power UNIT

Materials Managing Power UNIT one
Basic Description
This electrical power unit is built for your fork lift business, consisting of remarkably productive gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are managed from the lever in the manual release valve, which can be outfitted with an electric switch to activate the motor. The lowing pace is controlled through the pressure compensated flow handle valve.
Particular Notes
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned just before installation of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
4. Oil altering is required immediately after the original 100 operation hrs, afterwards once every single 3000 hours.
five. The electrical power unit proven is created to be mounted horizontally.

Material Managing Power UNIT two
Basic Description
This power unit characteristics energy up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the reducing velocity controlled through the pressure compensated flow handle valve. Products of this series might be extensively used in the sector of logistic products like fork lift, mini lift table, and so on.
Particular Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned just before mounting the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities, N46 hydraulic oil is advised .
4. Oil modifying is needed after the initial a hundred operation hours,afterwards the moment each 3000 hours.
5. The power unit really should be mounted horizontally.

Tages