We – EPG Group the largest couplings and gears manufacturing facility in China with five diverse branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Equipment couplings are also utilised in comparable programs, and transfer rotary motion at a 90-degree angle. A gear coupling is developed like a sprocket and it connects shafts even though offering torque at the same time. If gear is developed with a lot more than 5 levels of misalignment, makers use universal joints or equipment couplings for highest overall flexibility. China zurn gear coupling We also can layout and make non-normal items to satisfy customers’ particular specifications. PU Coupling, PU Couplings, Rubber Couplings, Polyurethane Coupling, Rubber Coupling All Kinds of Color

Bodily character: produced by injection with large quality polyester or mould CSM/SBR. It is designing and particular for all kinds of metal shaft coupling with really good efficiency of large tensile energy, large use resistant, high elastic resilience, h2o resistant, oil resistant and exceptional exhaustion resilience, higher influence resistant and so on. We have complete sets moulds and supply full selection of GR, GS, MT, Hb, HRC, L, NM and Gear J series couplings with high high quality and exceptional knowledge. Utilize to all kinds of industrial steel shaft coupling.

Specifications:
material: polyester, CSM/SBR
coloration: yellow, crimson, purple, inexperienced, black etc.
surface area: sleek
tensile power: 12-55Mpa
hardness: 80-98Shore A
elongation: 400%-650%
density: 1.25g/cm3
elasticity effect: >25%
tear toughness: 35-155KN/m
akron abrasion reduction: <0.05cm3/1.61km
compression established (22h*70oC): <10%
operating temperature: 120oC
common dimensions for polyurethane coupling: 
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/ninety five, L99/100, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
normal dimensions for rubber coupling:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/ninety five, L99/a hundred, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J
unique size build molding in accordance to the buyer’s drawings
***when you enquiry, pls validate product’s number and quantity***
98shore A GR coupling , PU coupling , polyurethane coupling with crimson shade etc.
 
GR coupling, PU coupling, polyurethane coupling
 
 
 
GR elastic spider is implement to machanical shaft coupling, buffered act on the joint of the transmission shaft.
 
Advabtages:
 
1, Incredibly resistant to put on, oil, ozone and ageing. Also resistant to hydrolysis (best for tropical climates)
 
two, Protect the drive from dynamic overload.
 
three, Very good physical properties.
 
4, Simple set up .
 
five, OEM
 
 
 
Technical Info
Operating problems
Temperature: -40~+100°C
Torque:  22.4-2500NM
 
 
Substance
Material: TPU
Hardness:   Yellow: 92 Shore A
                   Red: ninety eight Shore A
                   Green: 64 Shore D
Standard: KTR, Germany
 

/ The use of original products manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our company and the listed replacement areas contained herein are not sponsored, approved, or produced by the OEM. /